Thank you for the picture! Based off of that it looks like your 2016 Land Rover Range Rover is either an Evoque or a Sport. If you have an Evoque then I recommend the Curt Trailer Hitch Receiver # C13128 but if you have the Sport use the Curt Trailer Hitch Receiver # C13243.
Both options give you what you need to carry a hitch mount bike rack but a stabilizer strap like part # 18050 must be used for non-trailer products (like a bike rack) to keep in accordance with the Curt warranty.
For... view full answer...
You won't want to use an extender, because doing so would lower the hitch capacity by half, which wouldn't work for you. This being said, I believe we have a solution for you that will get you all the length you need and almost all the elevation.
You don't mention how long your existing ball mount is, but if it's typical like the # AMSC2 at 9-1/2 inches from hitch pin hole to the center of the hole where the trailer ball mounts, the Curt # D900 is 15-1/4 inches long from hitch pin hole... view full answer...
I will be happy to explain what trailer wiring kit you will need for your Range Rover.
The 4 Pole Harness and Hardwire Kit # C59496 will allow you to have a 4-Way connection on your 2007 Land Rover Range Rover. Since there is not a plug and play connection on your vehicle you will have to wire this product in manually. This product includes a circuit tester to help find wires behind the Range Rover's tail lights to gather signals.
If you are towing a trailer with brakes in addition... view full answer...
Yes, you will need a brake controller to control your trailer's brakes with your 2011 Land Rover Range Rover. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller item # 90195. This is a proportional brake controller that will activate your 2019 Airstream's brakes in proportion to your Range Rover's braking action. It automatically adjusts the trailer's braking based on deceleration of your vehicle. The brakes will activate immediately so you won't have to worry about pausing like... view full answer...
To rewire your 1988 Land Rover Defender with a European 13-Pin plug, I recommend the 4 Pole Harness # C59496. This is ideal since it will combine your current 3-wire system into a simple 2-wire system which is the standard for US trailers. This Modulite connects directly to your battery to prevent drawing too much power from your Defender's tail lights. You can use # 18144 to securely mount the plug to your hitch.
This kit also comes with a basic circuit tester which you will need to use... view full answer...
Go To Results